Products /


Thin Repairing Mortar

Product Definition
Indoor and outdoor rendering and levelling mortar walls, floors and ceilings in thickness from 1 to 5 mm

Application Areas
> Smoothening walls prior to restoration, ceramic tiles installation and painting.
> Smoothening and filling hairy cracks on the surfaces of foamed cement, concrete, brick walls.
> Repairing old, damaged renders, concrete up to 1-5 mm

> High adhesion strength.
> Smooth and solid surface.
> Resistant to freeze and thaw.
> Applicable up to 1-5 mm thickness.
> Easily applicable.

Technical Features
(at 23°C and 50% RH)

General Data:
Appearance: Grey powder
Shelf Life: 12 months when stored in the original sealed packing in dry place.

Application Data:
Application Temperature Range: (+5°C)-(+35°C)
Mixing Ratio: 5.5-6 litres water / 25 kg powder
Pot Life: Min. 25 minutes
Application Thickness: Max. 5 mm (for single layer)
Consumption (avr.): 1.55 kg/m² (per 1mm thickness)
Waiting Time Before Bonding: 6 hours

Performance Data:
Compresive Strength after 28 days (EN 12808-3): ≥ 15.0 N/mm² (28 days)
Flexural Strength after 28 days (EN 12808-3): ≥ 4.0 N/mm²
Tensile Strength (EN 1542): ≥ 1.0 N/mm²
Service Temperature Range (after final cure): (-30°C)-(+80°C)
Restrained Shrinkage-Expansion (EN 12617-4): ≥ 0.8 N/mm²
Capillary Water Absporption (EN 13057): ≤ 0.5 kg/m²h0,5
Dangerous Substances: Complies
Reaction to Fire (EN 13501-1): A1

Application Instructions
> Substrates must be compact, free of dust, loose parts and clean from oils, grease, paint or adhesive residues when TAMİRART 5 can be applied to damp surfaces without cure time will be slightly prolonged.
> It is advisable to wet highly absorbent substrates or beter to apply KALEKİM ASTAR or KALEKİM DOLGULU ASTAR.
> Pour 25 kg of TAMİRART 5 into 5.5-6 litres of clean water slowly and mix to obtain a homogeneous paste free from lumps. (A low speed mixer is recommended to mix).
> Allow to stand for 5-10 minutes to mature. After remixing, the paste is ready for application.
> Apply TAMİRART 5 with rendering machine flat trowel with a firm pressure to ensure a good adhesion.
> When applying on walls directly exposed to sun or wind, it is advisable to wet the surface of TAMİRART 5 for the following 24 hours after application. For surfaces having ideal humidity and in ideal weather conditions, wait for 6 hours before tiling. Waiting time will be shorter in summer and longer in winter conditions.
> The mortar should be used within 25 minutes. Unfavorable climatic conditions like high temperature, low humidity, wind may shorten this duration.
> Dispose mortars of which pot life is expired.
> Clean tools and hands with water, surfaces with a damp cloth.


> Since contains cement, irritating to eyes, respiratory system and skin. For further information refer to safety data sheet.
> Indicated consumption is a general information. It may change depending on the application conditions and surface properties.

> Store in dry medium. Do not stack more than 10 bags on top of each other.

> 25 kg multi-ply paper bags.

Quality Documents
Non-structural repair mortar conforming
TS EN 1504-3 / Class R2.

Back Back  Top Top Print Print


Kale Kalekim Corporate                  Kalekim Facebook Kalekim Blog Kalekim Twitter

Türkçe    > English    Русский