|
SeraCare Cement Remover
Product Definition
Acidic cleaning material that cleans the cement residues on acid resistant coating materials without releasing harmful gases.
Application Areas
> For easy cleaning of all cement based construction residues and mortar residues that remain on coating materials and grout joints after the application.,
> On ceramic, clinker, cotto, rustic coating, furnace stones, natural stone, granite ceramic, porcelain ceramic, glazed ceramics.
Technical Features
> Appearance: Transparent Liquid
> Application Temperature: +5°C / +35 °C
> Mixture Rate: Cement Remover / Water 1/1 - 1/5
> pH Value: < 1
> Consumption: Average 1 lt. / 20 - 100 m² (Varies according to the amount of cement residue)
> Shelf Life: 12 months in unopened package stored in dry medium.
Application Instructions
> May be mixed with water with a rate of 1/1 or 1/5 depending on the amount of residue. Cleaning may be performed by two methods with SeraCare Cement Remover which is mixed with water with such rates:
Cleaning by hand:
> Spread SeraCare Cement remover with brush to approximately 2 m² section of the place to be cleaned.
> Wait for 2 - 3 minutes and start cleaning by rubbing with cloth.
> Take the dirty water in the floor to a bucket by a sponge. Wash the cloth and sponge frequently with clean water.
> Clean all the area in such way and after the cleaning re-apply SeraCare Cement Remover prepared by mixing less water to places where the dirt is not removed.
> Rinse the total area with ample water and wipe with a cloth and let it dry.
> Use SeraCare Cement Remover for cleaning difficult residues without mixing with water and by leaving it for a longer time on the surface.
By Rubbing and with wet/dry vacuum machine :
> Spread SeraCare Cement remover with brush to approximately 4 m² section of the place to be cleaned.
> Wait for 2 - 3 minutes and start cleaning with rubbing machine below which a hard washing cloth is placed.
> Collect the dirty water on the floor with the vacuum machine.
> Clean all the area in such way and after the cleaning re-apply SeraCare Cement Remover prepared by mixing less water to places where the dirt is not removed.
> Rinse the total area with ample water and collect it with vacuum and let it dry.
Warnings
> Wear gloves to use the product, avoid direct contact with skin and eyes.
> Spoils varnished and polished surfaces.
> Do not use in polished marbles and coating materials which are not acid-resistant.
> Do not us for cleaning oil.
> Make a prior test trail before using it on the application surfaces.
> Avoid frequent contact of the product with grouting materials
Storage
> Shelf Life: 12 months in unopened package stored in dry medium.
Packaging
> 1 lt. plastic bucket
|
Kale 
