
1054 Technoflex
Deformable Tile Adhesive (C2TE S1)
YENİ İÇ DIŞOrtalama tüketim miktarı
0 kg = 0 paket*
*m2 girdiğinizde ürünün ambalaj çeşidine göre kaç paket almanız gerektiğiniz hesaplanacaktır.
Deformable Tile Adhesive (C2TE S1)
YENİ İÇ DIŞDescription
• High performance cementitious flexible adhesive with extended open time and reduced slip for ceramic tiles and stones.
•There is a version with Wintertech technology which can be used safely between (-10 °C) - (+ 35 °C) for continued application in winter conditions.
Packaging
• 20 kg and 25 kg multi-ply paper bags
Field of Application
• Interior and exterior floor and wall bonding of, all types and sizes of ceramic tiles, natural stone, marble, granite, porcelain ceramic, clinker, cotto
on cementitious renders, cementitious screeds and concrete.
• Bonding of tiles on existing ceramic tile, granite.
• Bonding of tiles on painted walls and gypsum.
• Bonding of ceramic tiles in swimming pools,
basins and any other wet places.
• Bonding of tiles on terraces and balconies.
• Bonding of tiles on places where sudden, temperature changes occurs like cold storage, depots and over floor heat installations,
• Bonding of tiles on places subject to heavy traffic, like shopping malls, hospitals, schools.
Properties
• Perfect adherence.
• Highly Deformable, resistant to temperature changes.
• Can be applied on vertical surfaces even for bonding of heavy tiles without sagging.
• Extended open time.
• Easily trowellable.
Technical Properties (at 23°C and 50% RH)
General Data
• Appearance: Grey or White powder
• Shelf Life: 12 months when stored in the original sealed packing in dry place.
Application Data
• Application Temperature Range: (+5°C)-(+35°C)
• Mixing Ratio: 6-7.5 liters water / 25 kg powder
• Pot Life: 6 hours
• Slip (EN 1308): ≤ 0.5 mm
• Open Time (EN 1346): After 30 minutes ≥ 0.5 N/mm²
• Grouting: 8 hours on wall; 24 hours after on floor
• Consumption: 3-5 kg/m²
Performance Data
• Tensile Adhesion Strength (EN 1348):
- initial ≥ 1 N/mm²
- after heat exposure ≥ 1 N/mm²
- after immersion in water ≥ 1 N/mm²
- after freeze/thaw cycles ≥ 1 N/mm²
• Deformability (EN 12002): ≥ 2.5 mm-S1 Deformable
• Service Temperature Range (after final cure): (-40°C)-(+80°C)
• Release of Dangerous Substances (EN 12004): See SDS.
• Reaction to Fire: A2
ÜRÜN VİDEOSU
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nullam ultrices mollis volutpat. Quisque id libero laoreet, ornare sem iaculis, varius.
Hesaplama Aracı
*m2 girdiğinizde ürünün ambalaj çeşidine göre kaç paket almanız gerektiğiniz hesaplanacaktır.