1059 ULTRATECH

Two Component, Extra Fast Setting, Highly Deformable Tile Adhesive (C2FTE S2)

Find a Dealer

Definition

It is an extra fast-setting, S2 class, very flexible, two-component, high-performance, cement-based adhesive mortar with reduced slip properties and a long working time.

Usage Areas

Exterior bonding of large sized ceramic, stone, granite, porcelain tile, marble etc. Ultratech is allowing grouting in 2-3 hours and, rapid tiling of large sized tiles in places that has to be ready for use within one day, Bonding of tiles on places subject to heavy traffic, like shopping malls, hospitals, schools. Floor and wall bonding of large and thin tiles, (3-5 mm) like Kalesinterflex, Interior and exterior floor and wall bonding of all types and sizes of ceramic tiles, natural stone, marble, granite, porcelain ceramic, clinker, cotto on cementitious renders, cementitious screeds and concrete, Exterior bonding of ceramic, granite or porcelain ceramics sized 40x40 cm up to 30 meter and 60x60 cm up to 15 meter height.

Package

Powder component: 25 kg multi-ply paper bags Liquid component: 7.5 lt drums

Features

Perfect adherence. Extra fast setting within 3 hours. Highly deformable, resistant to temperature changes. Resistant to all climatic conditions. Can be applied on vertical surfaces even. For bonding of heavy tiles without sagging. Extended open time.

Professional Knowledge

Technical Properties

(at 23°C and 50% RH)

General Data

Appearance 1st component: Grey powder, 2nd component: White liquid

Shelf Life: 12 months when stored in the original sealed packing in dry place

Application Data

Application Temperature Range: (+5°C)-(+35°C)

Mixing Ratio: 7.5 liters liquid / 25 kg powder

Pot Life: 1 hours Grouting: 2-3 hours Consumption: 4.5 - 6.5 kg/m² (Combined Method)

Performance Data

Slip (EN 1308): ≤ 0.5 mm
Open Time (EN 1346): After 30 minutes ≥ 0.5 N/mm² Tensile Adhesion Strength (EN 1348): - after 3 hours: ≥ 0.5 N/mm² - initial (after 28 days): ≥ 1 N/mm² - after heat exposure: ≥ 1 N/mm² - after immersion in water: ≥ 1 N/mm² - after freeze/thaw cycles: ≥ 1 N/mm²

Deformability (EN 12002): ≥ 5mm-S2

Highly deformable Service Temperature Range (after final cure): (-40°C)-(+80°C)

Release of Dangerous Substances (EN 12004): See SDS.

Reaction to Fire: Bs1d0

Documents

TDS

1059 Ultratech TDS_EN

672.27 KB

1059 Ultratech TDS Arabic

382.16 KB

1059 Ultratech TDS Francais

1128.54 KB