Country and Language Selection
Cancel
There were no results
Home Page Sealants and Grabs 1401 TECHNOBOND PU
1401 TECHNOBOND PU

1401 TECHNOBOND PU

Polyurethane Sealant and Adhesive

Find a Dealer
Find a Dealer
General Information
Definition
It is a polyurethane based, multi-purpose, elastic adhesive and mastic.
Usage Areas
It is suitable for elastic bonding of panels, profiles and other pieces on the most common substrates such as stone, concrete, ceramic, copper, lead, zinc, aluminium, metals, R.V.S., wood, HPL and cement fibre panels etc.
Package
  • 290 ml / cartridge 12 pieces / box 600 ml / sausage 20 pieces / box
Features
Its initial hold is fast. It allows the bonding of heavy building materials without the need for fixing. It is waterproof and cures with air humidity. It is single component. It adheres to all types of surfaces. It can be painted over. It does not lose volume. It is long-lasting and resistant to harsh weather conditions. It does not require primer (Pre-testing is recommended). It has excellent elasticity and very good adhesion strength. It does not contain solvents, silicones and isocyanates.
Professional Knowledge
Technical Properties
 (at 23°C and 50% RH)
General Data
Appearance: Grey colored polyurethane adhesive and sealant
Shelf Life: 12 months in original sealed cartridges and sausages
Application Data
Application Temperature Range: (+5°C)-(+40°C)
Curing Rate: 3 mm / 24 hours
Skin Formation Time: 60-90 minutes
Tack Free Time: 60 minutes
Performance Data
Hardness, Shore A (DIN 53505): 40-45 (1 day)
Elasticity Module (%100) (ISO 8339): > 0.40 N/mm²
Tensile Strength (ISO 8339): > 0.60 N/mm²
Elongation at Breaking Point (ISO 8339): > 500%
Elastic Recovery (ISO 7389): > 70%
Resistance to Flow (ISO 7390): ≤ 3 mm
Service Temperature Range (after final cure): (-30°C)-(+80°C)